Cret Bee
Atlas High-Toughness Engineering Resin
- 【Never Brittle】: Zero loss of toughness; highly impact-resistant and shatterproof. After thermal post-curing, performance reaches 80–90% of ABS standards.
- 【Low Odor】: Indoor-friendly; requires no fume hood, making it ideal for home workshops.
- 【Scratch & Abrasion Resistant】: Forms a hard surface shell that resists scratches, making it suitable for parts subject to repeated use.
- 【High Precision】: Ultra-low shrinkage with sharp, crisp details; compatible with 385–405nm 3D printers.
- 【Post-Curing Requirements】: Requires thermal post-curing at 110°C for 1 hour (using a hot air circulation system).
Choose options
Atlas
From "Physical Stacking" to "Chemical Integration" | Thermoset Technology · Never Brittle · Performance Reaching 80–90% of ABS
Hardness (Shore D)：75D
Viscosity (cps @25°C)：800-1000
Liquid Density (g/cm3)：1.1
Flexure Strength (MPa)：35
Flexure Modulus (MPa)：1200
Tensile Strength (MPa)：31
Elongation at Break (%)：65
Tensile Modulus (MPa)：1200
Notched Impact Strength (J/M)：68
Heat Deflection Temperature(0.45MPa)：42
Shrinkage %：<2%
Shelf Life：12 months
Atlas FAQ
FAQs
No, you cannot. You require an oven equipped with a standard hot-air circulation system, maintained at 110°C for one hour.
In cases of overexposure or elevated temperatures, white resin may exhibit slight yellowing or color darkening; this is a normal phenomenon and does not affect its mechanical properties.
Yes, that is possible. However, once the curing process is complete, you will need to apply a clear coat to ensure the transparent parts appear transparent.
For standard DLP/MSLA printers, wavelengths ranging from 385 nm to 405 nm are suitable.
Yes, our formula has been specifically optimized for scent, making it suitable for indoor use.