Odin Engineering Resin
Features:
- The heat deformation temperature is 270℃ (currently domestic products are about 100-150℃);
- Low threshold for use (10-20 minutes in an ordinary curing box is enough, and the difference before and after curing does not exceed 15%);
Applications:
- Rapid molds
- Laminating jigs
- Production jigs/fixtures
- Industries with temperature resistance requirements;
- Auto parts, protective gear, molds, laminating films, etc.
Quantity:
Choose options
Features:
- The heat deformation temperature is 270℃ (currently domestic products are about 100-150℃);
- Low threshold for use (10-20 minutes in an ordinary curing box is enough, and the difference before and after curing does not exceed 15%);
Applications:
- Rapid molds
- Laminating jigs
- Production jigs/fixtures
- Industries with temperature resistance requirements;
- Auto parts, protective gear, molds, laminating films, etc.
Quantity:
Features:
- The heat deformation temperature is 270℃ (currently domestic products are about 100-150℃);
- Low threshold for use (10-20 minutes in an ordinary curing box is enough, and the difference before and after curing does not exceed 15%);
Applications:
- Rapid molds
- Laminating jigs
- Production jigs/fixtures
- Industries with temperature resistance requirements;
- Auto parts, protective gear, molds, laminating films, etc.
Quantity:
| Color: | Translucent green |
| Hardness: | 87D |
| Viscosity: | 900 (cps) |
| Density: | 1.19 |
| Flexural strength: | 85 |
| Tensile strength: | 53 |
| Elongation at break: | 10% |
| Impact strength: | 21 (J/M) |
| Heat deformation temperature: | 270 |
| Linear shrinkage: | <2% |